20-cell 36v 187Wh 5.2A Packs + Optional XT30-JST Mini Powerstrip

  • Sale
  • $153.00
  • Regular price $240.00
Shipping calculated at checkout.


Please read the description carefully.

Shipping to Lower 48 USA states only via Ground Shipping. No international shipping including Hawaii, Guam, Puerto Rico. Non-USA customers click here.

 

These are Scooter Battery packs using x20 Eve 18650 or LGM26 cells in 10s2p. These packs are reclaimed from scooters. Available to purchase as "tested" or "untested". Cells are coming in at around 80-90% of the original capacity. Can be used for replacing internal Ninebot ES2/ES4 scooter battery, and also for powering eBikes or any other 36v devices requiring 5.2A or less. For higher amp applications, combine multiple packs in parallel (combine x3 using this Amp Booster). There are bolt holes on the bottom that can be used to secure it and it also has easy access to the cells.

*Note: Untested packs are sols as-is, no guarantees. Some untested packs may only be suitable for harvesting the cells. No returns or refunds on untested packs.

Also available to purchase is an optional XT30-JST Mini Powerstrip that can charge up to 6 packs via the small charging cables JST connector. If the BMSs of your packs are sleeping, they can wake up by charging them via their JST connectors (usually without having to expose and press the hidden BMS reset button).
Follow these 3 simple steps:
1) Charge the packs through their own XT30 connector. When above 30v ...
2) plug in the charger to the XT30 connector on the XT30-JST Mini Powerstrip, then
3) plug in the pack's JST cables into the XT30-JST Mini Powerstrip's x6 JST connectors. As long as the charger is supplying voltage (charger light red) the voltage should wake up the BMS right away and the pack's LED light will blink blue.

 

6 options available (choose from the dropdown menu):

  • x1 pack (Untested)
  • x2 packs (Untested)
  • 6x untested packs + FREE XT30-JST Mini Powerstrip
  • x1 pack (Tested, BMS awake)
  • x1 pack (Tested, BMS awake) + XT30 charger 2A
  • x1 XT30-JST Mini Powerstrip (for x6 packs)

** NOTE:  To buy more than x6 packs, email support@jag35.com

Most packs contain Blue EVE 18650, 2.55Ah cells. Some packs may contain LGM261865.

 

EVE 18650


or


LGM261865 

 

Awakened battery packs have a blue LED light on the tope edge, near the XT30 connector. If your pack has no blinking light, it needs to be awakened (see below for instructions on waking up the pack's BMS). Charge these packs using the NEW 42V 1.7A BATTERY CHARGER + MU CABLE BY XIAOMI or this variable chargerMake sure you fully charge the pack as soon as you receive it and before using it.

Battery Pack LED Indicator Lights

  • Blinking blue = BMS awake, ready to discharge
  • Blinking red = Battery charging
  • Blinking red and blue = Battery trickle-charging
  • No blinking light = Battery BMS asleep, needs waking

Charger LED Indicator Lights

  • Solid red = Charging
  • Blinking red = Trickle charge
  • Green = Fully charged

    When the charger is plugged into your battery pack you should see the charger's LED indicator light red and the battery pack's LED indicator light blinking red. If you see the charger's LED indicator light blinking red (trickle charging) and the battery pack's LED indicator light blinking red & blue, leave your battery pack charging for an extended period of time until the charger's LED indicator light turns solid red. See video below for additional steps.

     ** NOTE:  To buy more than x6 packs, email support@jag35.com

    If your pack is asleep, this video shows you how to wake it up:


    Harvesting Cells

    Scooter packs are great for harvesting 18650 cells as they typically have very low cycles.  To harvest the cells you have to crack packs open and extract the cells,  you'll have to cut and clean the Nickel interconnects using snips.

    Once the Cells are out and clean you will have to test them using a charger like this.

    Typical Capacity: 2600mAh
    Nominal Capcity: 2550mAh
    Diameter: 18mm
    Length: 65mm
    Voltage nominal: 3.6V
    Charge voltage cut-off: 4.2V
    Discharging cut-off: 2.5V

     

    This video shows you how to DIY harvest the cells, based on a very similar pack:




    Listings that are "untested" are sold as-is. These items are sold for DIY and Second Life purposes. Even when sold as “new”, “NOS”, or “like-new”, they may be in less than perfect condition.