Skip to product information
1 of 5

Jag35

24v 26650 LiFePo4 POWERWALL Battery Modules

24v 26650 LiFePo4 POWERWALL Battery Modules

Regular price $139.00 USD
Regular price $200.00 USD Sale price $139.00 USD
Sale Sold out
Shipping calculated at checkout.
24V module

Please read the description carefully.

Shipping to Lower 48 USA states only via UPS Ground. No international shipping including HI, GU, PR. Non-USA customers click here.

 

These are 24v LiFePO4 26650 Battery Packs. They contain x112 26650  3000mAh cells.  They are 8s14p and they contain SONY Branded cells that tested 95%-100%.   The 8s Modules yields 1121Wh.  These modules can be used as 24v on a variety of equipment and can be setup as 48v for DIY PowerWall Applications.  These Modules come out of an Energy storage application where the BMS has failed but the cells have on the average less than 100 cycles. LiFePO4 is the safest Lithium chemistry as its virtually impossible for them to combust,  Lithium Iron Phosphate is the preferred chemistry on energy storage applications due its long cycle life usually in the 4000-6000 cycles.  The only downside has been their high price, but finally I can offer quality modules at around the $100/Kwh.

 

BMS Recommended for these Modules:
For single or multiple modules used in parallel for 24v - Daly 8s 50A

 

 

 

For 2 or multiples of 2 modules used in series/parallel for 48v - Daly 16s 60A


8S Module

Typical Cell Capacity: 3000mAh
Nominal Module Capcity: 42Ah
Height: 3"
Length: 18"
Width: 8.5"
Voltage nominal: 25.6v
Charge voltage cut-off: 29.2v
Discharging cut-off: 21.6v

____

Note that these are reclaimed packs, so the actual cell voltage you receive may be lower than the label shows. We make no guarantees that all cells will be usable. These items are sold for DIY and Second Life purposes. Sold as-is. No refunds. Buyer is responsible for proper cell recycling/disposal.

Listings that are “untested” as sold as-is and cannot be returned, exchanged or refunded. These items are sold for DIY and Second Life purposes. Even when sold as “new”, “NOS”, or “like-new”, they may be in less than perfect condition. Buyer is responsible for proper cell recycling/disposal.

If you buy a product from us and then realize you don't have, or don't want to acquire, the tool(s) or information needed to make our product(s) work for your specific build, this does not constitute valid grounds for replacements, exchanges or refunds. You are responsible for doing your due diligence before making any purchases.

View full details