30-cell 36v 8A, Scooter Battery Packs

  • Sale
  • $35.50
  • Regular price $85.00
Shipping calculated at checkout.


Please read the description carefully.

Shipping to Lower 48 USA states only via Ground Shipping. No international shipping including Hawaii, Guam, Puerto Rico. Non-USA customers click here.

 

These are Scooter Battery packs using x30 LGM26 or Eve 18650 cells in 10s3p. The packs are reclaimed from scooters but are in working order, cells are coming in at least 95% of the original capacity. These can be used for replacing internal XIAOMI 365 scooter battery packs. They can also be used for powering eBikes or any other 36v device requiring up to 8 Amps.

Charger with XT30 Connector available here.


LGM261865 cells

 

EVE 18650 cells

EVE ICR18650 lithium ion cells scooter packs LiCoO2 Jehu Garcia JAG35.com

 

Awakened battery packs have a blinking blue LED light on the tope edge, near the XT30 connector. If your pack has no blinking light, it needs to be awakened (see below for instructions on waking up the pack's BMS). Charge these packs using the NEW 42V 1.7A BATTERY CHARGER + MU CABLE BY XIAOMI. Make sure you fully charge the pack as soon as you receive it and before using it.

Battery Pack LED Indicator Lights

  • Blinking blue = BMS activated
  • Blinking red = Charging
  • Blinking red and blue = Trickle charging
  • No blinking light = BMS asleep, needs to wake

Charger LED Indicator Lights

  • Solid red = Charging
  • Blinking red = Trickle charge
  • Green = Fully charged

    When the charger is plugged into your battery pack you should see the charger's LED indicator light shine in solid red and the battery pack's LED indicator light blinking red. If you see the charger's LED indicator light blinking red (trickle charging) and the battery pack's LED indicator light blinking red & blue, leave your battery pack charging for an extended period of time until the charger's LED indicator light turns solid red.

    If your pack is asleep, watch this video to learn how to wake it up: 


    To wake the pack, connect the charger first, then press the BMS reset button.

    Charger with XT30 Connector available here.

    Scooter packs are great for harvesting 18650 cells as they typically have very low cycles.  To harvest the cells you have to crack packs open and extract the cells,  you'll have to cut and clean the Nickel interconnects using snips.

    Once the Cells are out and clean you will have to test them using a charger like this.

    Pack Dimensions:  13.5" x 3" x 1.75"
    Pack Weight: 3.5 LBS
    Nominal Capcity: 2600mAh
    Diameter: 18mm
    Length: 65mm
    Voltage nominal: 3.6V
    Charge voltage cut-off: 4.2V
    Discharging cut-off: 2.5V

     

    These items are sold for DIY and Second Life purposes. Even when sold as “new”, “NOS”, or “like-new”, they may be in less than perfect condition.